29. Production of Elixir of Life at home
Michael Pharaday did not know about Bioclock, and hence, he did not know
that Elixir of Life is accumulated on the one of electrodes during water electrolysis. If
he knew it, than today we would have the honour to shake hands with this ingenious
physicist - expert.
In figure 17 you can see the elementary plant for water electrolysis. What is it?
First of all, it is two electrodes (1 and 2), made of food stainless steel. Such steel,
which saucepans, spoons, forks and knives are made of. You will not need steel bars,
but flat electrodes, because they have larger water touch area. A semi-conductor
device, high-power diode (such as D214A in the Russian classification) is firmly
attached to the one of the electrodes (1). One conductor of a twin-core cable is
soldered to this diode.
Plant for production of water enriched with hydrogen
1 - electrode made of stainless steel, placed in series with high-power diode. 2 -
electrode made of stainless steel. 3 -dense bag made of cotton fabric, in which
the negative electrode (1), where the positively charged hydrogen ions
accumulate, is placed into the water. 1 litre bag is for the diversion of hydrogen
water of tank (4). 4 - tank filled with water for the electrolysis (saucepan), bag
(3) - also the plant productivity: 1 litre of hydrogen water in 25-30 minutes.
fig. 17
For convenience it is useful to mount these electrodes on a platform-frame
made of a good dielectric, having fixed the constant distance between the electrodes.
Then we select a 5 litres tank (4) made of food plastic designed for hot
foodstuff.
It can be a usual bucket. Another one tank of 1 litre (3) for Elixir of Life is
necessary. It is made of a firm dense cotton tissue, for example, of a fire hose. You
can use canvas also. It is more important to use a dense fabric, which will help youto take the prepared Elixir of Life out of the large tank, not spilling it and saving the
hydronium ion.
This smaller tank (3) is inserted into the large tank (4) and both of them are
filled in with water-electrolyte. Do not take the distilled water, because such water is
a dielectric and there will be no electrolysis. You should not boil water for the
electrolysis, because boiled water has a poor conductivity.
You may use spring water, because it has a definite mineral structure already,
so, it is often a prepared electrolyte.
The size of a submerged in the electrolyte part of electrodes should be 18 cm
lengthwise and 5 cm in width. The thickness of the electrodes is not important.
During electrolysis the electrode (1) with the diode wears out, losing the iron. It will
need to be replaced from time to time. But this process is very long. As a whole, the
electrodes should be longer, than 18 cm, because you will need a place for the diode
and cable fasteners and also for the platform-frame, fixing the distance of 7 cm
between the electrodes.
The electrolyte can be prepared as follows. Dissolve 0,5 grammes of potassium
chloride or 0,5 grammes of sodium chloride or 0,5 grammes of calcium chloride in
five litres of water. The electrolyte is ready. Pour it in both tanks.
Potassium chloride, sodium chloride and calcium chloride should be added in
order to accelerate the electrolysis. You do not need to add them, if you have good
enough electrolysis already.
Mount the platform with the electrodes on the large tank edges so that the
electrode (1) with the diode to be inserted into the smaller 1 litre tank (3) and the
electrode (2) without the diode - into the large 5 litres tank.
Put a plug into a socket of the household electrical supply network. An
electrolytic separation of water will start. Thus, the inorganic hydronium ion (H30-H20) and ions of iron (Fe) will accumulate in the smaller tank. (Let's remind you that
iron ions are necessary for us for heme synthesis). In 15-20 minutes Elixir of Life will
be ready.
Time of Elixir preparation depends on the quality of the electrolyte, electrodes,
line current strength, line voltage and water of the area you live in. But as a whole,
you will be able always to produce Elixir.
Pull the plug out from the socket.
Take out the 1 litre tank (3) with Elixir of Life and pour it out in glassware (a
bottle). Pour the content of the large tank (4) in a sink: we don't need it any more.
Plants for water electrolysis are produced by an industrial way and you
are able to buy one (learn more).
Those, who can not or does not want to burden themselves with the
physical experiments, I want to assure that soon you will be able to buy
water enriched with a proton in stock.
Electrolyzed oxidizing (EO) water is commonly used in medicine for
disinfection. The results of the clinical researches show that hydronium ion has nonspecific virucidal and microbicidal effects. The acidity of EO water is quite different
from the same of dangerous drugs such as HCl, H2SO2, and HNO3, having no Cl-,
SO4- and NO3- ions. It exhibits an acidic property due to H+ only and its reaction in a
living body seems to be different from those of designated dangerous strong acidic
substances. Human cells and tissues receive no damage from this EO water, while
bacteria and viruses are killed effectively.
Additional information available in the Internet through search engines. Today
there are many modifications of such machine, but the principle of operation is the
same. For example, in the US a machine is sold by Hoshizaki America (ROX 20TA-U),
in Japan - by Nippon Intek Inc. (JAW -035). In Russia the machines STEL - 40 (80,
120, 250, 1000) are available at research-and-production company "Espero". Etc.
|
